Meyer's Small to Medium Capacity Spreaders

• Eight models - 125 to 390 bushel capacity
• All poly box to resist rotting, breaking and leakage problems
• #67 T-Bar Positive Lock Steel Chain with a minimum tensile strength of 16,000 lbs. per strand = 32,000 lbs of pulling strength
• Chain links can be added or removed in only minutes using minimum tools
• Hydraulic end gate and fine spread p
• Equipped with Tapered Roller Bearings
• The bottom is a 50:1 Bronze Worm Gear with bearings and oil bath for long life shear protection
• The optional spreader mounted flow control box regulates the flow rate to the hydraulic motor that is coupled to the apron drive gear box
• Shaft is made of the strongest materials available
    

Meyer Industrial Super Pull-Type Spreader

• Three models - 465 to 750 bushel capacity
• Our single piece 1/2 inch thick floor is made of HMW Virgin Polyethylene Plastic
• The sides are are also made of super-slippery polyethylene plastic boards
• Beaters made of large 27 inch diameter steel; top beater has 15 inch diameter
• The optional automatic chain oiler system that is activated by the rear gate everytime you raise the rear gate your chains get oiled
• Twin #67 T-BarPositive Lock Steel Chain with a minimum tensile strength of 16,000 lbs. per strand =64,000 lbs.of pulling strength.
• Rugged #80 Heavy Chain Drive Hydraulic Drive is standard.
• The banded belt drive with Q.D. sheaves was developed for drives subjected to shock loads, pulsating loads, or extreme vibrations where single belts could flip over on the pulleys
• A high strength tie band permanently joins the 3 belts to provide lateral rigidity