Badger Model 41 9" Conveyor

• Convey up to 70 feet
• Standard chain speed - approx. 140 feet per min.
• Standard operating capacity - approx. 72 cubic feet per min. - approx. 57 bushel per min
• #62 steel detachable chain with corded rubber flights and ribbed steel backing for long life
• Drive reduction system at "drop off end"
• V-belt and chain reduction drive system - easy to maintain
• 16 gauge galvanized steel construction (trough & sides)
• Frame sections: 4' - 8' or 10'
• Hopper Included
    

Badger Model 70 11" Conveyor

• Convey up to 150 feet (reversible units available)
• Standard operating capacity - approx. 80 cubicfeet per min. - approx. 64 bushels per min.
• Rugged 667H pintle chain with corded rubber flights and ribbed steel backing for long life
• Drive reduction system at "drop off end"
• V-belt and chain reduction drive system - easy to maintain
• 14 gauge galvanized steel construction (trough and sides)
• 16 gauge galvanized steel construction (trough & sides)
• Frame sections: 5' - 8' or 10'
    

Badger Model 55 16" Conveyor

• Convey up to 150 feet
• Standard chain speed - approx. 117 feet per min.
• Standard operating capacity - approx. 93 cubic feet per min. - approx. 74 bushel per min.
• Hook rod chain with welded steel flights incorporate a high density polyethylene flight liner for smooth quiet operation
• Drive reduction system at "drop off end"
• V-belt and chain reduction drive system - easy to maintain
• 16 gauge galvanized sides with enclosed bottom feed trough
• Frame sections: 5' or 8'
    

Badger Model 6000 14" Conveyor

• Convey/feed up to 200'
• Standard operating capacity
• Belt speed - 300' ft/min Plow speed - 60 ft/min approx. 81 cubic ft/min; approx. 64 bu/min approx. 3,650 lbs/min
• 14" low stretch polyester cord PVC belt
• 8 1/2" large diameter drive and idler rolls
• Snub roller at drive end
• Single motor drive for belt and plow- no reversing switch needed
• Optional one or two way plow w/high density polyethylene liner
• 7/32" diameter plow cable (minimum strength 2600 lbs)
• A full 4" diameter, deep V-pulley with pulley cleaner
• Drive reduction system at "drop off end"
• V-belt and chain reduction drive system - easy to maintain
• 16 gauge galvanized steel construction (trough & sides)
• Frame sections: 5' - 8' -10'
    

Badger Model 8910A Power Shuttle Feeder

• Feed up to 250'
• Standard operating capacity - approx. 54 feet per minute - approx. 65 cubic feet per minute; approx. 52 bushel per minute
• V-belt and worm gear drive
• Drive reduction system at center of feed bunk
• 2 HP or less depending on feeder length
• No conveying belts, chains or cables
• Center loading
• 14 gauge galvanized steel trough
• Frame sections: 2.5' -5'-10'